Installation Procedure - Canon iR C2880 Series Service Manual

When installing the equipment, see the 'Combination Table of Accessory
Installation'.
1) Remove the 2 face seals [1].
F-2-75
2) Tighten 2 stepped screws (RS tightening) [1] to the upper right cover of
the host machine.
A: In the case that the card reader is not attached to the host machine
F-2-76
B: In the case that the card reader is attached to the host machine
[1]
F-2-77
3) Set the cut-offs [2] of the support plate on the Document Tray [1] with the
stepped screws [3].
[1]
[1]
[3]
[2]
F-2-78
2.10 Installing the Key Switch Unit
2.10.1 Turning Off the Machine
iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i / iR C2380i
See the host machine installation 'Points to Note When Turning Off the Main
Power'.

2.10.2 Installation Procedure

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i / iR C2380i
1) Release five wire saddles [1] on the rear upper cover to free two cables [2]
upward.
[2]
[1]
F-2-79
2) Detach the rear upper cover [1].
- 4 screws [2] (Remove)
- 3 screws [3] (Loosen)
[2]
[1]
[3]
F-2-80
Chapter 2
[1]
[2]
0013-8386
0013-8323
[2]
2-21