After Replacing The Laser Scanner Unit - Canon iR C2880 Series Service Manual

F-6-19
[2]
F-6-20
Make sure that the screw [1] on the front side is on the same level as the
screw [2] on the rear side.
F-6-21
Make sure that the scanner unit [2] is placed lower than the duct [1] on the
rear side of the host machine.
[1]
[1]
[2]
F-6-22

6.3.1.3 After Replacing the Laser Scanner Unit

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
When replacing the laser scanner unit, register the values described on the
label which is included in the package in the service modes below.
After registration, attach the label onto the front cover.
COPIER > ADJUST > LASER > FSLUT-Y1 to 8
COPIER > ADJUST> LASER > FSLUT-M1 to 8
COPIER > ADJUST > LASER > FSLUT-C1 to 8
COPIER > ADJUST > LASER > FSLUT-K1 to 8
Registration of the main scanner reproduction ratio correction value
Chapter 6
[1]
[2]
0014-3099
6-13