Installing The Deck Heater; Checking The Parts To Install - Canon iR C2880 Series Service Manual

F-2-115
8) Connect the connector [1] of the power code unit, and while fitting the
hooks [2] to the holes [3] found at the bottom of the cassette pedestal, at-
tach it with 2 screws (TP; M3X6) [4].
[1]
[2]
F-2-116
[4]
F-2-117
9) Attach the rear cover of the cassette pedestal.
10) Connect the lattice connector to the host machine.
11) Connect the power code [1] to the power code unit [2] and the environ-
ment heater outlet [3] of the host machine.
12) Attach the outlet label [4].
No. Part name
[1] Heater unit
[2] Power supply code base
[3] Relay harness unit
[1]
[2]
[3]
Part number QTY
FG6-9651-000 1pc.
FG6-1117-000 1pc.
FG6-2957-000 1pc.
[4]
[3]
[1]
13) Attach the plug cover [1] on the power code [2].
- 1 screw [3] (use the screw that was removed in the step 1)
- 1 screw (TP; M3X6) [4]
[4] [1]
[3]

2.14 Installing the Deck Heater

2.14.1 Checking the Parts to Install

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i / iR C2380i
Every components of the cassette heater unit are supplied as service parts, so
have the following parts on hand.
[2]
[5] [6]
No. Part name
[6] Cable protection bush
[7] Power supply label
[8] RS tight screw (M4X8)
Chapter 2
[2]
F-2-118
[2]
F-2-119
[3]
[8]
[7]
F-2-120
T-2-7
Part number QTY
WT2-5098-000 1pc.
FS6-8725-000 1pc.
XA9-0628-000 2pc.
0014-1207
[
2-29