Canon iR C2880 Series Service Manual page 451

Menu Screen
Setting screen of e-RDS. The form and the initial value of each setting item are as follows.
Item(meaning)
E-RDS
(Embedded-RDS)
RGW-ADR
(RDS-Gateway ADDRESS)
RGW-PORT
(RDS-Gateway PORT)
COM-TEST
(Communication Test)
COM-LOG
(Communication Log)
F-12-1
Explanation
Turning OFF/ON e-RDS. 0:OFF / 1:ON
Counter information and error information are transmitted to the host at ON.
Initial value: 0: OFF
URL of the host (When the input area is selected (touched), shift to the keyboard screen)
Initial value: URL of an actual host.
Length: 129 characters (NULL is contained)
Port Number of the host
Initial value: 443
Range of available number: 1-65535
Execution of Communication test
Communication test starts when you select (touch) this and press the [OK] key.
e-RDS tries the connection with the host, and displays the result by "OK!" or "NG!". (NG: No Good, the
communication test is failed)
The result of communication test
When this is selected (touched), and the blank rectangle on right side is selected, it switches to "Log list
screen".
Chapter 12
12-3