Canon iR C2880 Series Service Manual page 598

Chapter 17
Sub item
TMP-TBL7 Fixing temperature regulation temperature offset (special fixing mode)
Temperature adjustment of the temperature regulation for special fixing mode
This improves the hot offset or fixability in case of the special fixing mode
Settings
-2: -10 deg C
-1: -5 deg C
0: 0 deg C
+1: 5 deg C
+2: +10 deg C
[Factory setting/value after clearing RAM: 0]
FXS-TMP2 ITOP temperature offset (thick paper)
Temperature adjustment of ITOP for thick paper (106 to 163g paper)
This reduces the unevenness of the gloss that appears for 94 mm at the leading edges of the thick sheets (106 to 163g
paper).
Settings
-2: -10 deg C
-1: -5 deg C
0: 0 deg C
+1: 5 deg C
+2: +10 deg C
[Factory setting/value after clearing RAM: 0]
FXS-TMP3 ITOP temperature offset (super-thick paper)
Temperature adjustment of ITOP for super-thick paper (164 to 220g paper)
This reduces the unevenness of the gloss that appears for 94 mm at the leading edges of the super-thick sheets (164 to
220g paper).
Settings
-2: -10 deg C
-1: -5 deg C
0: 0 deg C
+1: 5 deg C
+2: +10 deg C
[Factory setting/value after clearing RAM: 0]
FXS-TMP4 ITOP temperature offset (Bk OHT)
Temperature adjustment of ITOP for Bk OHT
This reduces the unevenness of the gloss that appears for 94 mm at the leading edges of Bk OHT paper.
Settings
-2: -10 deg C
-1: -5 deg C
0: 0 deg C
+1: 5 deg C
+2: +10 deg C
[Factory setting/value after clearing RAM: 0]
FXS-TMP5 ITOP temperature offset (4C OHT)
Temperature adjustment of ITOP for color OHT
This reduces the unevenness of the gloss that appears for 94 mm at the leading edges of color OHT paper.
Settings
-2: -10 deg C
-1: -5 deg C
0: 0 deg C
+1: 5 deg C
+2: +10 deg C
[Factory setting/value after clearing RAM: 0]
FXS-TMP6 ITOP temperature offset (regular, thin, regular 2 1/2)
Temperature adjustment of ITOP for regular paper (64 to 105g paper) half speed
This reduces the unevenness of the gloss that appears for 94 mm at the leading edges of regular paper and half-speed
paper.
Settings
-2: -10 deg C
-1: -5 deg C
0: 0 deg C
+1: 5 deg C
+2: +10 deg C
[Factory setting/value after clearing RAM: 0]
FXST2-N2 L/L regular 2 ITOP wait time
Pre-rotation extension for regular 2 at an outside air temperature of 18 deg C or below.
This improves the fixability of regular 2 at an outside air temperature of 18 deg C or below.
Setting range: 0 to 20
[Factory setting/value after clearing RAM: 0]
FXST2-UH L/L super-thick paper ITOP wait time
Pre-rotation extension for super-thick paper at an outside air temperature of 18 deg C or below.
This improves the fixability of super-thick paper at an outside air temperature of 18 deg C or below.
Setting range: 0 to 30
[Factory setting/value after clearing RAM: 0]
17-62
COPIER>OPTION>BODY
Description level.
1
1
1
1
1
1
1
1