Dc Controller Pcb; Before Detaching The Dc Controller Pcb; Detaching The Dc Controller Pcb - Canon iR C2880 Series Service Manual

Chapter 10
[4]
F-10-66
3) Disconnect the 4 connectors [1] on the control panel CPU PCB.
4) Disconnect the 2 connectors [2] on the control panel inverter PCB.
5) Free the cable from the 3 wire saddles [3].
[3]
F-10-67
6) Detach the plate [1].
- 2 screws [2]
[1]
[2]
F-10-68
7) Remove the frame [1] inside the control panel.
- 11 screws [2]
- 1 screw [3]
[2]
[2]
F-10-69
8) Remove the control panel LCD [1].
- 2 screws [2]
10-24
[2]
[3] [1]
[2] [1]
[1]
[2]
[1] [3] [2]
F-10-70

10.5.8 DC Controller PCB

10.5.8.1 Before Detaching the DC Controller PCB

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
1) Detach the rear upper cover. (page 10-16)[Detaching the Rear Upper
Cover]
2) Detach the DC driver PCB. (page 10-28)[Removing the DC Driver
PCB]

10.5.8.2 Detaching the DC Controller PCB

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
1) Shift the DC controller box [1] to the left and lift it to remove.
- 7 connectors [2]
- 2 edge saddles [3]
- 7 screws [4]
[2] [4]
[4]
[1]
F-10-71
MEMO:
There is no access point for the other connector of a cable connected with the
connecter at the upper left.
2) Detach the DC controller PCB [1].
- 8 screws [2]
[2] [1]
[3] [2] [4]
[4]
[2] [3] [2]
0014-1287
0014-1288