Canon iR C2880 Series Service Manual page 102

Chapter 2
3) Open the cassette right upper cover [1]. If the cassette pedestal was in-
stalled, open also the cassette right lower cover [2].
[1]
[2]
F-2-81
4) Pull out the reader power supply cable [1].
5) Detach the right rear cover [2].
- 4 screws [3]
[3]
F-2-82
6) Remove the key switch bracket [1].
- 1 screw [2]
[1]
[2]
F-2-83
7) Fix the key switch unit [2] to the key switch bracket [1].
- 1 screw (binding; M4X6) [3]
2-22
[2] [1]
[2]
F-2-84
8) Disconnect the connector [1] on the host machine from the wire saddle [2]
to get it out to the rear side of the host machine.
9) Close the wire saddle.
F-2-85
10) Fix the key switch bracket [1].
- 1 screw [2] (screw removed in the step 6)
[1]
[2]
F-2-86
11) Connect the connector of the key switch unit to the connector [1] of the
main unit.
F-2-87
12) Remove the blanking area [2] of the right rear cover [1] with nipper, etc.
[1]
[3]
[2]
[1]
[1]