Canon iR C2880 Series Service Manual page 551

EE Alarm location code
11 Waste toner conveying
33 Fan
34 Image position compensation control
61 Finisher staples
62 Saddle stitcher
70 PDL
72 UFR board
FFFF Alarm code
0001: Waste toner box full (intermediate copy belt)
0007: Paper delivery cooling fan (FM5) alarm
0012: Manual feed cooling fan (FM6) alarm
0013: Copier exhaust heat fan (FM3) alarm
0001: Incorrect data read (zero included in image position pattern read data)
0002: Incorrect data read (abnormal data in at least 8 of the 10 sets of image position patterns)
0003: Pattern read timeout alarm
0004: Attempt was made to compensate abnormally large slant as result of image position
compensation.
0005: Attempt was made to correct large abnormally large magnification as result of image
position compensation.
0001: No staples
0001: No stitch needle
0001: memory overflow
0002: font memory overflow
0003: micro font memory overflow
0004: image font memory overflow
0005: pattern font memory overflow
0006: hard disk write error
0001: Register access failed.
0002: Data transfer to memory failed (or timeout).
0003: Rendering error (ECI module)
0004: Rendering error (EM module)
0005: Rendering error (IE module)
0006: Rendering error (IDM module)
0007: Rendering error (LAM module)
0008: Rendering error (MI module)
0009: Rendering error (PCM module)
0010: Rendering error (PGM module)
0011: Rendering error (VII module)
0012: Rendering error (VOI module)
0013: Stores compressed image during FallBack.
Chapter 17
17-15