Figure 2 Disconnect the Mailbox connector
Revised
Phaser 4600/4620/4622 Printer Service Manual
REP 11.4 Mailbox Rear Door
Parts List on
PL 11.10 Item 5
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1.
Remove the Mailbox Output Trays,
2.
Separate the Mailbox from the printer,
3.
Remove 2 screws and loosen the side covers.
4.
Open the rear door 90 degrees to release the hinges for the side covers,
Figure 1 Remove the rear door
04/2016
4-121
WARNING
REP
11.1.
GP
14.
Figure
4 Repairs and Adjustments
REP 11.3, REP 11.4
1.