Xerox Phaser 4600 Service Manual page 74

09-300-00 Drum Warning RAP
09-300-00 The drum cartridge is near end of life.
BSD-Reference:
WD 6
Initial Actions
• Check Drum Cartridge life count. Replace if at or near end of life.
• Reseat the Drum Cartridge.
Procedure
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Check the Drum Cartridge life counter. Life count is at or near end of life.
Y N
Cycle system power. The error message is displayed.
Y N
Reassemble and perform SCP 6
Replace the Drum Cartridge. The error message is displayed.
Y N
Reassemble and perform SCP 6
28.2) and reseat CN16 on the MCU Board. The
Remove the Right Cover (REP
message is displayed.
Y N
Reassemble and perform SCP 6
Replace the MCU Board, REP 9.8.
Replace the Drum Cartridge.
2 Status Indicator RAPS
09-300-00, 09-400-00
WARNING
Final Actions.
Final Actions.
Final Actions.
09-400-00 Replace Drum Cartridge RAP
09-400-00 The Drum Cartridge has reached end of life.
BSD-Reference:
WD 6
Initial Actions
• Check Drum Cartridge life count. Replace if at or near end of life.
Procedure
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Check the Drum Cartridge life counter. Life count is at end of life.
Y N
Cycle system power. The error message is displayed.
Y N
Reassemble and perform
Replace the Drum Cartridge. The error message is displayed.
Y N
Reassemble and perform
Remove the Right Cover
message is displayed.
error
Y N
Reassemble and perform
Replace the MCU Board,
Replace the Drum Cartridge.
04/2016
2-50
WARNING
SCP 6 Final Actions.
SCP 6 Final Actions.
28.2) and reseat CN16 on the MCU Board. The
(REP
SCP 6 Final Actions.
REP 9.8.
Phaser 4600/4620/4622 Printer Service Manual
error
Revised