Rep 10.9 Duplex Drive Assembly; Rep 10.10 Fuser - Xerox Phaser 4600 Service Manual

REP 10.9 Duplex Drive Assembly

Parts List on PL 4.10 Item 5
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Duplex Unit, REP 10.1.
2. Remove the IP Board Cover, REP
3. Remove the Right Cover, REP 28.2.
4. Remove the MCU Board, REP 3.4.
5. Disconnect P/J37 from the Duplex Dive Assembly.
6. Remove 4 screws (Gold, metal) that secure the assembly to the chassis,
Figure 1 Remove the Duplex Drive Assembly screws
4 Repairs and Adjustments
REP 10.9, REP 10.10
WARNING
28.1.
Figure

REP 10.10 Fuser

Parts List on PL 10.10 Item 1
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Do not touch the Fuser while it is hot.
1. Remove the Rear Door,
2. Remove 4 thumbscrews that secure the Fuser in the chassis.
3. Hold the handles and slide the Fuser from the chassis,
1.
04/2016
4-98
WARNING
WARNING
REP 28.6.
Figure 1.
Figure 1 Remove the Fuser
Phaser 4600/4620/4622 Printer Service Manual
Revised