Xerox Phaser 4600 Service Manual page 140

Figure 1 Disconnect the IP Board
5. Remove 5 screws (metal) and swing the front edge out to release the connectors from the
rear panel, Figure 2.
4 Repairs and Adjustments
REP 3.6
Figure 2 Remove the IP Board
Replacement
After removal of the IP Board from the cage, move the Configuration Card, Configuration Card
holder and if installed, optional Memory and Hard Drive to the new board.
04/2016
4-18 Phaser 4600/4620/4622 Printer Service Manual
Revised