Rep 4.5 Right Side Chassis Fan; Rep 6.1 Laser Unit - Xerox Phaser 4600 Service Manual

REP 4.5 Right Side Chassis Fan

Parts List on PL 4.10 Item 2
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Duplex Unit, REP 10.1.
2. Remove the IP Board Cover, REP
3. Remove the Right Cover, REP 28.2.
4. Disconnect P/J38 from the harness.
5. Remove 1 screw (plastic) that secures the fan in the duct.
6. Pull the fan from the duct to remove.
Figure 1 Remove the Right Side Chassis Fan
4 Repairs and Adjustments
REP 4.5, REP 6.1
WARNING
28.1.

REP 6.1 Laser Unit

Parts List on PL 6.10 Item 1
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
NOTE: Laser Unit part numbers vary by model.
1. Remove the Duplex Unit, REP
2. Remove the IP Board Cover,
3. Remove the Right Cover, REP
4. Remove the Waste Toner Cartridge.
5. Remove the Left Cover, REP
6. Remove the Top Cover, REP
7. Disconnect P/J21 from the Laser Unit.
8. Remove 4 screws (metal) that secure the Laser Unit to the chassis,
Figure 1 Remove the Laser Unit
04/2016
4-24
WARNING
10.1.
REP 28.1.
28.2.
28.3.
28.5.
Figure
Phaser 4600/4620/4622 Printer Service Manual
1.
Revised