Rep 8.40 Feeder Take Away Clutch - Xerox Phaser 4600 Service Manual

REP 8.40 Feeder Take Away Clutch

Parts List on PL 8.30 Item 5
Removal
Use safe handling procedures when removing the module. Refer to
is heavy.
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Separate the option feeder from the printer,
2. Remove the Tray.
3. Remove the Front Cover, REP 7.24.
4. Remove the Right Cover, REP 7.25.
5. Remove the Rear Cover, REP 7.27.
6. Remove the right side frame, REP
7. Remove 2 screws (metal) that secure the clutch bracket to the Feed Motor Assembly.
8. Disconnect P/J80 to remove the clutch from the shaft,
4 Repairs and Adjustments
REP 8.40
WARNING
GP 15. The module
WARNING
GP 15.
7.34.
Figure 1.
Figure 1 Remove the Take Away Clutch bracket
04/2016
4-68 Phaser 4600/4620/4622 Printer Service Manual
Revised