Rep 7.33 Left Side Frame - Xerox Phaser 4600 Service Manual

Figure 2 Remove the Upper Option Harness
Revised
Phaser 4600/4620/4622 Printer Service Manual

REP 7.33 Left Side Frame

Parts List on PL 7.15 Item 2
Removal
Use safe handling procedures when removing the module. Refer to
is heavy.
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Separate the option feeder from the printer,
2. Remove the Tray.
3. Remove the Front Cover, REP
4. Remove the Right Cover, REP
5. Remove the Rear Cover, REP
6. Remove the safety latch spring.
7. Remove 7 screws (metal) that secure the left side frame to the chassis,
Figure 1 Remove the left side frame
04/2016
4-47
WARNING
GP
WARNING
GP 15.
7.24.
7.25.
7.27.
4 Repairs and Adjustments
REP 7.32, REP 7.33
15. The module
Figure 1.