Xerox Phaser 4600 Service Manual page 212

10. Lift the bracket and rest on the printer chassis, Figure 2.
Figure 3 Remove the Joint Board screws
Figure 2 Remove the rear support bracket
13. Disconnect P/J40 from the Exit Assembly, Figure 4.
11. Disconnect CN3 and CN4 from the Joint Board and feed into the chassis.
12. Remove 4 screws (metal) that secure the Joint Board to the chassis, Figure 3.
4 Repairs and Adjustments Revised
04/2016
REP 10.6
4-90 Phaser 4600/4620/4622 Printer Service Manual