Example Procedure: Measure Ac Voltage (Ch1), 0 To 20 Vrms Only - GE Measurement & Control Druck DPI 620 Genii User Manual

User Manual
2.6 Example Procedure: Measure AC Voltage (CH1), 0 to 20
Vrms Only
To prevent electrical shocks, use only the GE specified
AC probe (Part: IO620-AC) to measure AC voltages that
are more than 20 Vrms (maximum: 300 Vrms). Refer to
Section 2.7
Figure 2-12 show CH1 set-up to measure an AC voltage (0 to
20 Vrms) or AC mV (0 to 2000 mVrms)
Figure 2-12 Measure AC Volts or AC mV on CH1. Range ±20 Vrms
1. Set the applicable software options
2. Complete the electrical connections and continue with
the measure operation
06 June 2013
WARNING
20 Vrms Max
Druck DPI620 Genii
Page 47 of 179