User Manual
1.16
Instrument Return
1.16.1
Returned Material Procedure for USA
If the instrument is unserviceable and requires a repair
return to a GE Service Center
Approved Service Agents
Web site: www.ge-mcs.com
Contact the GE Service Center, either by 'phone, fax or e-mail
to obtain a Returned Material Authorization (RMA) number,
providing the following information:
Product (i.e. Druck DPI 620 Genii)
Serial number
Details of defect/work to be undertaken
Operating conditions
Safety Precautions
Provide information if the product has been in contact
with any hazardous or toxic substances and, the
relevant MSDS references and precautions to be taken
when handling
Important notice
Do not use unauthorized sources to service this
equipment as this will affect the warranty and may
not guarantee further performance
06 June 2013
Druck DPI620 Genii
Page 30 of 179