Ac Power Replacement Procedure; Manpower; Tools; Preparations - GE Vivid 7 Service Manual

Hide thumbs Also See for Vivid 7:

Table of Contents

Section 8-11

AC Power Replacement Procedure

One person, 1 hour.

#2 Phillips screwdriver

Dangerous voltages are present in this equipment. Completely power off and

shut down the scanner before servicing.

1.) Shut down the system, see

2.) Remove Right Side Cover, see

3.) Remove Filter Cover, see

4.) Remove Lower Rear Cover, see

The Power Supply, as delivered in a Vivid 7, has been configured for either 115 VAC or 230

VAC. Do not interchange the two types and don't try to reconfigure the Power Supply for use

on another voltage; the Mains Circuit Breaker are different between the two types.

5.) Do this step if the intention is to change to another AC Power Supply:

4-2-3 "Power Shut Down" on page

"Upper Rear Cover Removal Procedure" on page

Record the voltage for the AC Power Supply being replaced (see label on rear of system).

___ - 115VAC or ___ - 230VAC.

Section 8-11 - AC Power Replacement Procedure

"Side Covers Removal Procedure" on page

"Lower Rear Cover Removal Procedure" on page