User Manual
1.14
Software and Firmware Upgrades
1.14.1
Viewing Software Revision
The software revisions running on the DPI620 Genii can be
viewed by selecting:
DASHBOARD >>
Note: If the software revision number is highlighted red then
an upgrade is available
1.14.2
Upgrading the Software
Follow the website instructions to download the files onto
a USB flash memory drive.
www.ge-mcs.com
1. Select:
DASHBOARD >>
2. Enter the calibration PIN: 5487
3. Select the
4. Select:
UPGRADE
5. Continue with one of these operations:
06 June 2013
STATUS >> SOFTWARE BUILD
button.
ADVANCED
Druck DPI620 Genii
Page 24 of 179