GE Measurement & Control Druck DPI 620 Genii User Manual page 37

User Manual
3. Setup a channel for measurement
• FUNCTION selects the function required (eg Current
• UNITS selects the type of unit required, (eg Hz, kHz),
• UTILITY selects the required utility (Refer to section
• CAPTION allows the user to change the caption, if
4. Once all settings have been selected, press the
button at the bottom of the screen to return to the
TASK SETTINGS screen.
Please note for the settings to be set the user must
also press the
5. Repeat the above if another channel is required.
06 June 2013
or Voltage). For more options scroll down the menu
by swiping the display from bottom to top.
please note that there may only be 1 type of unit
available in particular Functions.
2.2 for details).
required.

button in the TASK SETTINGS menu.
Druck DPI620 Genii

Page 37 of 179