GE Measurement & Control Druck DPI 620 Genii User Manual page 27

User Manual
• Upgrade the HART Device Library
By default the HART device library is stored on the
micro SD Card.
1. Set the DPI620 Genii USB client port to Storage
Device mode by selecting:
DASHBOARD >>
2. Locate the self-extracting file
'DPI620_DD_library_20**_*.exe'
3. Connect DPI620 Genii Client USB port to PC
USB port. Device will connect to PC as a
Removable Disk.
4. Run 'DPI620_DD_library_20**_*.exe' and
extract files to the Removable Disk (this will
take several minutes due to the large file size)
**_* indicates the DD release version from the
HART foundation
The required directory structure on the micro SD
card is shown in Figure 1-4 Hart DD Directory
Structure
06 June 2013
DEVICES >> USB CLIENT PORT
Druck DPI620 Genii
Page 27 of 179