Determining New Extension Numbers - Nortel Meridian 1 Succession 1000M Installation And Configuration Manual

Page 472 of 562

Determining new extension numbers

553-3011-210 Standard 1.00
Changing preprogrammed data
The character display reads:
1 DEFAULT SETS
2 NUMBERING PLAN
7 Select "2 NUMBERING PLAN" by entering the number "2".
The character display reads:
FIRST NUMBER (XXXX)?
8 To create a new first number, enter the digits you want and press the
pound key.
9 The number you enter as the first number in the numbering plan is
assigned to slot 1, unit 0 of the main cabinet or chassis. The default
numbers assigned to the remaining card and unit combinations are in
sequence, assuming each slot has up to 16 units.
If you wish to change the default numbering plan, and need to determine the
extension number that will be assigned to a specific telephone, perform the
following procedure:
Procedure 68
Determining the extension number
1 Identify the line card to which the telephone is connected. Take the card
slot number associated with the card and subtract 1.
2 Multiply this number by 16.
3 Add the first extension number in the new numbering plan.
4 Identify the unit number the telephone is terminated on and add it to the
result obtained in step 3.
October 2003
End of Procedure
End of Procedure