Ntag26 Xmfr Card - Nortel Meridian 1 Succession 1000M Installation And Configuration Manual

NTAG26 XMFR card

The NTDK20 SSC card provides the functionality of the Extended
Multi-Frequency Receiver (XMFR) card. However, this card can exist with
the SSC card if you want to access additional XMFR capability.
The XMFR card receives MF digit information. Connections are made
between a PBX and a CO. Through the IPE MF Receiver, the Small System
supports features such as Automatic Number Identification (ANI), Meridian
911 (M911), and Feature Group D (FGD).
Procedure 31
Installing the XMFR card
1 Insert the NTAG26 card in its assigned slot.
You can install this card in:
• slots 1 through 10 in the main cabinet or slots 11 through 30 in the
expansion cabinets
• slots 1 through 3 in the chassis or slots 7 through 10 in the chassis
expander
2 Configure and enable the card through LDs 13 and 34.
Note: After the card is enabled, the LED will flash three times to indicate
it is conducting a self-test. If the LED remains lit, then the self-test has
failed.
Installing optional circuit cards
End of Procedure
Small System
Page 225 of 562
Installation and Configuration