Installing The System Ground; Contents; Introduction - Nortel Meridian 1 Succession 1000M Installation And Configuration Manual

Installing the system ground

Contents

Introduction

This section contains information on the following topics:
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cabinets or chassis powered by the same service panel. . . . . . . . . .
Cabinets or chassis powered by different service panels . . . . . . . . .
Grounding instructions for cabinets and chassis . . . . . . . . . . . . . . . . . .
Multiple pieces of equipment in an equipment rack/cabinet . . . . . .
This chapter describes how to install and connect the ground source to the
Small System cabinets and chassis. This chapter contains the following
procedures:
• Procedure 12, "Grounding the cabinets or chassis" on
• Procedure 13, "Earthing the cabinets or chassis (UK)" on
This chapter also describes how to ground multiple pieces of Chassis system
equipment in an equipment rack/cabinet when one or more pieces of
equipment does not have a grounding lug. See "Multiple pieces of equipment
in an equipment rack/cabinet" on page 156.
Small System Installation and Configuration
Page 149 of 562
149
150
150
151
156
page 151
page 156