Cross-Connecting Terminal Digital Subscriber Loops; Activating Telephones - Nortel Meridian 1 Succession 1000M Installation And Configuration Manual

Page 350 of 562
Table 47
Cable Pair Color Combinations
W-Bl
Color
Bl-W
0
Unit
R-BR
Color
BR-R
8
Unit

Cross-connecting terminal Digital Subscriber Loops

Activating telephones

553-3011-210 Standard 1.00
Connecting the telephones
W-O W-G
O-W G-W
1 2
R-S BK-BL
S-R BL-BK
9 10
Refer to ISDN Basic Rate Interface: Installation and Configuration
(553-3001-218) for a complete description of terminal Digital Subscriber
Loops (DSL) cross-connecting and installation.
Activating telephones is not difficult. Activate each telephone by performing
a procedure on the telephone. Automatic Set Configuration is the software
feature used to activate telephone sets.
Note: You cannot activate the data feature using the procedures in this
chapter. To program a telephone with the data feature, configure it in
LD 11 with Data Class of Service as described in Software Input/Output:
Maintenance (553-3001-511).
This chapter contains procedures for activating the following models of
telephones:
• a default model with a default extension number
• a customized model with a customized extension number
This chapter provides these procedures for telephones with and without
character displays.
October 2003
W-BR W-S
BR-W S-W
3 4
BK-O BK-G
O-BK G-BK
11 12
R-BL R-O
BL-R O-R
5 6
BK-BR BK-S
BR-BK S-BK
12 14
R-G
G-R
7
Y-B
B-Y
15