Table of Contents
Advertisement
Table 17. Storage controller cards
Supported storage controller cards
Internal controllers
● PERC H755N
● PERC H755
● PERC H355
● HBA355i
External controllers
● HBA355E adapter
Internal Boot
● Boot Optimized Storage Subsystem (BOSS-N1): HWRAID 1, 2 x M.2 SSDs
● USB
Software RAID
● S160
Drives
The PowerEdge HS5620 system supports:
● 8 x 3.5-inch SAS/SATA drives
● 12 x 3.5-inch SAS/SATA drives
● 8 x 2.5-inch SAS/SATA (HDD/SSD) drives
● 8 x 2.5-inch NVMe drives
● 16 x 2.5-inch SAS/SATA (HDD/SSD) drives + 8 x 2.5-inch NVMe drives
NOTE:
For more information about how to hot swap NVMe PCIe SSD U.2 device, see the Dell Express Flash NVMe PCIe
SSD User's Guide at
Adapters & Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Documentation > Manuals and
Documents.
Ports and connectors specifications
USB ports specifications
Table 18. PowerEdge HS5620 USB specifications
Front
USB port type
No. of ports
USB 2.0-
One
compliant port
One
iDRAC Direct port
(Micro-AB USB
2.0- compliant
port)
NOTE:
The micro USB 2.0 compliant port can only be used as an iDRAC Direct or a management port.
NOTE:
The USB 2.0 specifications provide a 5 V supply on a single wire to power connected USB devices. A unit load is
defined as 100 mA in USB 2.0, and 150 mA in USB 3.0. A device may draw a maximum of 5 unit loads (500 mA) from a port
in USB 2.0; 6 (900 mA) in USB 3.0.
30
Technical specifications
https://www.dell.com/support
USB port type
USB 2.0-
compliant port
USB 3.0-
compliant port
>Browse all Products > Data Center Infrastructure > Storage
Rear
No. of ports
One
One
Internal (Optional)
USB port type
No. of ports
Internal USB 3.0-
One
compliant port
Advertisement
Table of Contents
