Advertisement
(e)
Text Stretch Mode
Text stretch mode enables a larger display area of 680x480 pixels in text
mode. Disabling this function reduces the resolution to the standard
640x400 pixels.
3.
Hard Disk
This item lets you select the hard disk IDE mode.
4.
I/O ports
This option controls settings for serial and parallel ports and the sound system.
(a)
Serial Port
This option allows you to set the COM level, COM1 or COM2, for the
serial port and PCMCIA slot.
The serial port interrupt request level (IRQ) and I/O port base address for
each COM level is shown below:
NOTE: Do not assign the same interrupt request level and I/O address to the
serial port and the PCMCIA card.
610CT
Enabled
Enables the text stretch mode feature. (Default)
Disabled
Disables the text mode stretch feature.
Enhanced IDE
(Default)
(Normal)
Standard IDE
To see the capacity of the hard disk, use the
CHKDSK command. See your DOS documentation
for details on using CHKDSK.
COM level
Interrupt level I/O address
COM1
4
COM2
3
COM3
4
COM4
3
Not used
3F8h
(Serial port default)
2F8h
3F8h
(Serial port default)
2F8h
(Disables port)
3-55
Advertisement
