Advertisement
Installing the Battery Pack
To install the 610CT battery pack, follow the steps below and refer to figures 4-1 to 4-3.
1.
Place the right end of the battery pack at the red line marked on the alignment
guide. The battery pack should seat level with the computer.
2.
Gently press down on the center of the battery pack and at the same time push it to
the right. When the battery is nearly seated, you will feel a slight resistance. Press
the battery in carefully until you feel it click into place, then lock the battery lock
(figure 4-3).
610CT
Figure 4-3 Installing the battery pack
4-7
Advertisement
