Advertisement
4.19 Microphone
Removing the Microphone
To remove the 610CT microphone, follow the steps below and refer to figure 4-30.
1.
Turn off the power to the 610CT. Disconnect the AC adapter, power cord, and all
external cables connected to the computer.
2.
Remove the battery pack, optional memory module, PCMCIA card, keyboard,
HDD, top cover, and display mask, as described in sections 4.2 through 4.7, and
4.15.
3.
Pinch the microphone cover to free it from two latches, then remove the cover.
4.
Remove the microphone.
5.
Remove the protective rubber cover from the microphone.
Installing the Microphone
To install the 610CT microphone, follow the steps below and refer to figure 4-30.
1.
Replace the protective rubber cover on the microphone.
2.
Seat the microphone.
3.
Replace the microphone cover and secure the two latches.
4.
Replace the display mask, top cover, HDD, keyboard, PCMCIA card, optional
memory module, and battery pack as described in sections 4.15, and 4.7 back
through 4.2.
4-44
Figure 4-30 Removing the microphone
610CT
Advertisement
