Advertisement
3.
To execute the DIAGNOSTIC TEST MENU from the DIAGNOSTICS MENU,
set the highlight bar to 1, and press Enter. The following DIAGNOSTIC TEST
MENU will appear:
TOSHIBA personal computer PT610CT DIAGNOSTICS
version X.XX (c) copyright TOSHIBA Corp. 19XX
DIAGNOSTIC TEST MENU :
1 - SYSTEM TEST
2 - MEMORY TEST
3 - KEYBOARD TEST
4 - DISPLAY TEST
5 - FLOPPY DISK TEST
6 - PRINTER TEST
7 - ASYNC TEST
8 - HARD DISK TEST
9 - REAL TIMER TEST
10 - NDP TEST
11 - EXPANSION TEST
12 - SOUND TEST
88 - ERROR RETRY COUNT SET [FDD & HDD]
99 - EXIT TO DIAGNOSTICS MENU
Refer to sections 3.4 through 3.15 for detailed descriptions of each Diagnostic
Test, 1 through 12. Function 88 sets the floppy disk drive and hard disk drive
error retry count. Function 99 exits the submenus of the DIAGNOSTIC TEST
MENU and returns to the DIAGNOSTICS MENU.
4.
Select the option you want to execute and press Enter. The following message
will appear:
SYSTEM TEST
SUB-TEST : XX
PASS COUNT: XXXXX ERROR COUNT: XXXXX
WRITE DATA: XX
ADDRESS : XXXXXX STATUS
SUB-TEST MENU :
01 - ROM checksum
02 - HW status
03 - Version check
04 - Fan ON/OFF
05 - Thermistor check
99 - Exit to DIAGNOSTIC TEST MENU
NOTE: The menu displayed by your 610CT may be slightly different from the
one shown above.
610CT
XXXXXXX
READ DATA : XX
: XXX
↑↓→←
:
Select items
Enter
:
Specify
Esc
:
Exit
PT610CT DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break]; test end
[Ctrl]+[C]
; key stop
↑↓→←
:
Select items
Enter
:
Specify
Esc
:
Exit
3-3
Advertisement
