Advertisement
(d)
Alarm Volume
This option disables or sets the volume level of the alarm. Setting this option
to off disables the computer's sound function for alarms. This option can
also be set by hotkeys.
When Alarm Volume is selected, the subwindow below is displayed to let
you enable or disable certain functions.
LOW BATTERY Alarm
Panel Close Alarm
(e)
System Beep
Use this feature to enable or disable the system beep.
(f)
Panel Power On/Off
This option allows you to automatically turn your computer on or off by
opening or closing the display panel. If this feature is enabled when the
computer is in Resume mode, the system is automatically powered off when
the display panel is closed and powered on when the panel is opened. This
option does not appear when the computer is in boot mode.
NOTE: Do not remove the AC adapter and battery pack at the same time
when you use this feature. If you do so, data saved by AutoResume will be
lost. You must also reset this option.
610CT
Off
Disables alarm.
Low
Sets the alarm volume to low.
Medium
Sets the alarm volume to medium.
High
Sets the alarm volume to high. (Default)
ALARM VOLUME OPTIONS
=
=
Enabled
Enables the feature. (Default)
Disabled
Disables the feature.
Enabled
Enables the feature. (Default)
Disabled
Disables the feature.
Enabled
Enables the feature.
Disabled
Disables the feature. (Default)
Enable
Enable
3-59
Advertisement
