Advertisement
Installing the Hard Disk Drive
To install the 610CT hard disk drive, follow the steps below and refer to figures 4-13 and 4-
14.
1.
Seat the HDD in its bracket.
2.
Secure the HDD to the bracket with four M3x4 flat-head screws.
3.
Seat the HDD into the bottom cover, making sure to align the connectors.
4.
Press the HDD gently to secure the connection.
5.
Secure the HDD bracket with one M2x4 screw.
6.
Replace the keyboard, optional PCMCIA card, optional memory module, and
battery pack as described in sections 4.5, 4.4, 4.3, and 4.2.
4-18
610CT
Advertisement
