Advertisement
4.7
Top Cover
Removing the Top Cover
To remove the 610CT top cover, follow the steps below and refer to figures 4-15 through 4-
17.
1.
Turn off the power to the 610CT. Disconnect the AC adapter, power cord, and all
external cables connected to the computer.
2.
Remove the battery pack, optional memory card, optional PCMCIA card, key-
board, and HDD as described in sections 4.2 through 4.6.
3.
Close the display and turn the computer upside down.
4.
Remove eight M2x8 silver screws from the bottom of the computer and two
M2x6 screws from the battery seating area. These screws secure the top cover to
the bottom cover (figure 4-15).
610CT
Figure 4-15 Removing the bottom cover screws
4-19
Advertisement
