Advertisement
NOTE: Sound Blaster compatible software uses IRQ7 as the default. If
you use such software, try to change the software setting to IRQ10. If you
cannot change the software setting, change the hardware setting to IRQ7.
(d)
DMA (direct memory access) channel
Use this option to set the DMA channel. The available settings are:
Channel 0, Channel 1 (Default), Channel 3
5.
Password
This option allows you to set or reset the password for power on and instant
security.
For details on setting the password refer to the 610CT User's Manual.
6.
Others
Whether or not you need to configure the computer with these options depends
primarily on the kind of software or peripherals you use.
(a)
Power-up Modes
This option lets you choose between AutoResume and boot mode. You can
also set this option using hotkeys. AutoResume is effective with either the
internal LCD or with an external monitor.
(b)
CPU Cache
Use this feature to enable or disable the CPU cache.
When enable is selected, a subwindow similar to the one below is displayed
to let you select the cache write policy. The options for this setting are
Write Policy (default) and Write-back.
610CT
Registered
The password has been registered.
Not registered
The password has not been registered.
Boot
Turns on boot mode. (Default)
Resume
Turns on the AutoResume feature.
Enabled
Enables the CPU cache. (Default)
Disabled
Disables the CPU cache.
3-57
Advertisement
