Advertisement
4.20 Display Cable
Removing the Display Cable
To remove the 610CT display cable, follow the steps below and refer to figure 4-31.
1.
Turn off the power to the 610CT. Disconnect the AC adapter, power cord, and all
external cables connected to the computer.
2.
Remove the battery pack, optional memory module, PCMCIA card, keyboard,
HDD, top cover, display mask, and microphone as described in sections 4.2
through 4.7, 4.15, and 4.19.
3.
Remove four M2.5x5 screws to release the cover assembly from the display
assembly.
4.
Disconnect the LCD harness from the LCD flex cable and remove it from the
unit.
Installing the Display Cable
To install the 610CT display cable, follow the steps below and refer to figure 4-31.
1.
Connect the LCD harness to the LCD flex cable and replace in the unit.
2.
Seat the cover assembly on the display assembly and secure it with four M2.5x5
screws.
3.
Replace the microphone, display mask, top cover, HDD, keyboard, PCMCIA card,
optional memory module, and battery pack as described in sections 4.19, 4.15, and
4.7 back through 4.2.
610CT
Figure 4-31 Removing the display cable
4-45
Advertisement
