Advertisement
* If these selections are made, you cannot warm boot the system by
pressing Ctrl + Alt + Del.
(i)
Pointing Devices
This option enables or disables the AccuPoint.
(j)
Boot Priority
Use this option to select the disk drive priority for boot up.
You can reverse the order by holding down the F10 key while the computer
is booting. This procedure alternates the setup setting.
7.
Battery Save Options
The following set of options can be selected in the submenu of User Setting,
which is one of the Battery Save Mode options.
(a)
Processing Speed
This feature changes the CPU processing speed.
610CT
Disabled
No Fn key equivalent. (Default)
Fn Equivalent
Left Ctrl b
Right Ctrl
Left Alt
Right Alt
Left Alt
Auto selected
The AccuPoint is disabled when a PS/2 mouse or
serial mouse is connected, otherwise the Accupoint
is enabled. (Default)
Simultaneous
If a PS/2 mouse or serial mouse is connected to an
optional port replicator, both the Accupoint and the
external mouse are enabled.
FDD → HDD
The computer looks for bootable files first on the
FDD and next on the HDD. (Default)
HDD → FDD
The computer looks for bootable files first on the
HDD and next on the FDD.
High
CPU operates at 90 MHz. (Default)
Low
CPU operates at half speed.
+
Left Alt*
+
Right Alt*
+
Left Shift
+
Right Shift
+
Caps Lock
3-61
Advertisement
