Advertisement
Installing the Sound Board
To install the 610CT sound board, follow the steps below and refer to figure 4-20.
1.
Partially position the sound board so the microphone and headphone ports on the
sound board can be placed into the side cover.
2.
Connect the sound board cable to PJ20 and seat the sound board.
3.
Replace the sound board cover.
4.
Secure the sound board and the sound board cover with one M2.5x3 screw.
5.
Replace the AccuPoint control button contact, RTC and backup batteries, top
cover, HDD, keyboard, optional PCMCIA card, optional memory card, and
battery pack as described in sections 4.9 back through 4.2.
610CT
4-27
Advertisement
