Installing the Fluorescent Lamp Unit
To install the 610CT fluorescent lamp unit, follow the steps below and refer to figures 4-28
and 4-29.
1.
Seat the FL unit, secure the cable in the latches, and replace the tape .
2.
Lay the FL unit cover in place and secure it with one M2.5x4 silver screw and
one M2.5x2 silver screw.
3.
Replace the display module, FL inverter board, display mask, PCMCIA card,
optional memory module, and battery pack as described in sections 4.17, 4.16,
4.15, 4.4, 4.3, and 4.2.
610CT
4-43