Advertisement
Installing the Power Supply Board
To install the 610CT power supply board, follow the steps below and refer to figure 4-21.
1.
Seat the power supply board in the bottom cover.
2.
Connect the power supply cable to PJ14 on the system board.
3.
Replace the sound board support.
4.
Replace the sound board, AccuPoint control button contact, RTC and back-up
batteries, top cover, HDD, keyboard, optional PCMCIA card, optional memory
card, and battery pack as described in sections 4.10 back through 4.2.
610CT
4-29
Advertisement
