Advertisement
4.9
AccuPoint Control Button Contact
Removing the AccuPoint Control Button Contact
To remove the 610CT AccuPoint control button contact, follow the steps below and refer to
figure 4-19.
1.
Turn off the power to the 610CT. Disconnect the AC adapter, power cord, and all
external cables connected to the computer.
2.
Remove the battery pack, optional memory card, optional PCMCIA card, key-
board, top cover, RTC and backup batteries as described in sections 4.2 through
4.8.
3.
Disconnect the cable from PJ3 on the sound board and lift off the AccuPoint
control button contact.
Figure 4-19 Removing the AccuPoint control button contact
4-24
610CT
Advertisement
