Advertisement
3.1
The Diagnostic Test
This chapter explains how to use the 610CT Diagnostic Test Program (TEST610) to test the
functions of the hardware modules. The Diagnostics Test Program is stored on the Diagnos-
tic Disk. The Diagnostics Test Program consists of 20 programs that are grouped into the
Service Program Module (DIAGNOSTICS MENU) and the Test Program Module (DIAG-
NOSTIC TEST MENU).
The DIAGNOSTICS MENU consists of the following eight functions.
DIAGNOSTIC TEST
HARD DISK FORMAT
HEAD CLEANING
LOG UTILITIES
RUNNING TEST
FDD UTILITIES
SYSTEM CONFIGURATION
SETUP
The DIAGNOSTIC TEST MENU contains the following 12 functional tests. These are all
located within the DIAGNOSTIC TEST function of the DIAGNOSTICS MENU.
SYSTEM TEST
MEMORY TEST
KEYBOARD TEST
DISPLAY TEST
FLOPPY DISK TEST
PRINTER TEST
ASYNC TEST
HARD DISK TEST
REAL TIMER TEST
NDP TEST
EXPANSION TEST
SOUND TEST
You will need the following equipment to perform some of the 610CT Diagnostic Test Pro-
gram.
The 610CT Diagnostics Disk (all tests)
A formatted working disk for the floppy disk drive test (all tests)
3.5-inch 2HD/2DD disk for 3.5-inch external FDD
A cleaning kit to clean the floppy disk drive heads (Head Cleaning)
A PCMCIA wraparound connector for the I/O card test (PCMCIA test)
A printer wraparound connector for the printer wraparound test (Printer test)
An RS-232-C wraparound connector for the RS-232-C port wraparound test
(ASYNC test)
The following sections detail the tests within the Diagnostic Test function of the DIAGNOS-
TIC TEST MENU. Refer to Sections 3.18 through 3.24 for detailed information on the
remaining seven Service Program Module functions.
610CT
3-1
Advertisement
