Advertisement
Subtest 04
Ponting Stick Check
NOTE: To execute the pointing stick check, mouse driver software must
be installed.
This subtest checks the function of the pointing stick as shown below.
a) IPS stick pressure sensing direction and parameter.
b) IPS switch function check.
This test reports the pointing stick response from the IPS and IPS switch by
displaying the location parameters. When the stick is pressed towards the
upper left, the <POINTING> display changes to an arrow as shown below. If
an IPS switch is pressed, the <BUTTON> display alternates black and white
and appears on the right side of the display. If two IPS switches are pressed or
if this test does not detect an error, it returns to the subtest menu.
*****
<<
PRESS BUTTON1 + BUTTON2 THEN END
When the button is pressed, it alternates as shown below.
610CT
IPS TEST PROGRAM (V1.00)
*****
>>
3-13
Advertisement
