Advertisement
Installing the System Board
To install the 610CT system board, follow the steps below and refer to figure 4-22.
NOTE: New system boards do not have fans attached. Therefore, when you remove a
malfunctioning system board for replacement, be sure to retain the fan for use in the
new system board.
1.
Seat the system board.
2.
Replace the metal cover.
3.
Secure the system board with five M2.5x4 screws.
4.
Replace the power supply board, sound board, AccuPoint control button contact,
RTC and back-up batteries, top cover, HDD, keyboard, optional PCMCIA card,
optional memory card, and battery pack as described in sections 4.11 back through
4.2.
610CT
4-31
Advertisement
