Advertisement
3.24.2
Accessing the SETUP Program
Selecting 0 from the DIAGNOSTICS MENU and pressing Enter displays the following:
MEMORY
Total
Base
Extended
Shadow BIOS ROM
DISPLAY
Display Adapter
LCD Display Mode
Display Colors
Power On Display
Text Mode Stretch
HARD DISK
HDD Mode = Enhanced IDE (Normal)
↑↓→←
:
Esc: Exit without saving, Home: Set default values, End: Save changes and Exit
Moving Within the SETUP Menu and Changing Values
Press ← and → to move between the two columns. Press ↑ and ↓ to move be-
1.
tween items in a column.
2.
Press either the spacebar or BkSp to change the value.
Accepting Changes and Exiting the SETUP Window
1.
Press End to accept the changes you made.
If the changed item does not require the system to reboot, the following message is
displayed:
If the changed item requires the system to reboot, the following message is dis-
played:
The changes you made will cause the system to reboot.
3-52
SYSTEM SETUP
= 8192 KB
=
640 KB
= 7360 KB
=
192 KB
= VGA compatible
= Color
= 16M Colors
= Internal/External
= Enabled
Select items, Space, BkSp : Change values
Are you sure? (Y/N)
Are you sure? (Y/N)
The changes you made will cause the system to
reboot.
BIOS version = x.xx
COM/PCMCIA/PRT
Serial Port
=
COM1(IRQ4/3F8H)
Parallel Port
=
LPT (378H)
Sound System
=
Address/IRQ/DMA
POWER ON PASSWORD
Not Registered
OTHERS
Power-up Mode
= Boot
CPU Cache
= Enabled
Battery Save Mode
= Full Power
Alarm Volume
= High
System Beep
= Enabled
Panel Power On/Off
= Disabled
Alarm Power On
= Disabled
Keyboard
= Layout/Fn
Pointing Devices
= Auto-selected
= FDD → HDD
Boot Priority
610CT
Advertisement
