Advertisement
2.
Display
This group of options helps you configure the computer's display.
(a)
Display Adapter
This field displays the internal controller for the VGA internal display. Only
VGA compatible is displayed. You cannot change it.
(b)
Display Mode
The LCD displays text in 80 characters by 25 lines and graphics in 640 by
480 pixels for either Color or Monochrome mode. Use this option to set
the computer's display mode to Color or Monochrome.
(c)
LCD Display Colors
This option is used to select the color palette of the internal TFT display
when the LCD mode is set to Color.
(d)
Power On Display
This option is used to select the display when booting up.
Internal/External
NOTE: When starting the computer in Resume mode, the last configuration
is remembered. If data does not appear on the display you are using after
starting in Resume mode, press Fn+F5.
Pressing Fn+F5 changes the display setting as follows:
3-54
Color
Selects color mode. (Default)
Monochrome
Selects monochrome mode. Some software is
displayed better in monochrome mode.
16M colors
Displays 256 colors out of 262,144 colors.
This value cannot be changed.
Selects an external CRT if one is connected, other-
wise it selects the internal LCD.
Simultaneous
Selects both the internal LCD and the external CRT
for simultaneous display.
internal LCD → simultaneous → external CRT.
610CT
Advertisement
