Enabling The Authorized Station List - Nortel BayStack 650 User Manual

Using the BayStack 650 Wireless LAN Access Point
Click one of the following:
•
•
•
•
•
Click Next.
5.
A confirmation dialog box opens.
Click Finish if the information is correct.
6.
The Configuration Completion dialog box opens
the changes are being processed.
Click OK when the process is complete.
7.

Enabling the Authorized Station List

This option enables the authorized station list.
To enable or disable the authorized station list:
Choose Configure > Group.
1.
Select the group you want to configure.
2.
The Multiple Configuration Wizard dialog box
Click Enable Authorized Station List.
3.
Click Next.
4.
The Enable Authorized Station List dialog box opens.
Check the Enable Authorized Station List check box to enable (default),
5.
or deselect to disable.
4-38
Add—Opens a dialog box requesting a MAC address. Enter the address
and click OK.
Import—Opens a Windows Import dialog box requesting a file to be
imported. Go to "Importing a File to the Adapter Card
for instructions on importing an authorized station list.
Set List Size—Opens a dialog box requesting to set the list size. This is
the maximum number of MAC addresses that can be added to a list.
Enter the value and click OK. The range is between 16 and 100 (default
is 50). Go to "Setting the Adapter List
on setting this list size.
Remove—Removes a single file from the list.
Remove All—Removes all files.
List" on
Size" on page 4-18 for instructions
(Figure 4-16) showing that
(Figure 4-15) opens.
page 4-17
203282-B