Mac Addresses - Nortel 2330 Installation Manual

Specification
Antenna type
Antenna gain
Frequency band
Operating channels
Association rates
Modulation
Transmit power
Specification
Antenna type
Antenna gain
Frequency band
Operating channels
Association rates
Modulation
Transmit power

MAC addresses

Each AP-2330/2330A/2330B is assigned a unique block of 64 MAC addresses. Each radio has 32 MAC addresses and
can therefore support up to 32 SSIDs, with one MAC address assigned to each SSID as its BSSID.
An AP's MAC address block is listed on a label on the back of the AP. If the AP is already deployed and running on the
network, you can display the MAC address assignments by using the show {ap | dap} status command.
All MAC addresses on an AP are assigned based on the AP's base MAC address, as described in
Table 8: 802.11b Radio Specifications
Description
Integrated omnidirectional with (2) radiating elements to allow for the use of
diversity
Internal: 2.48 dBi peak
2.4 GHz to 2.4835 GHz based on country regulations
Based on the country of operation specified by the system administrator
11 Mbps, 5.5 Mbps, 2 Mbps, and 1 Mbps, with automatic fallback
BPSK, QPSK, CCK
Based on the country of operation specified by the system administrator
Table 9: 802.11g Radio Specifications
Description
Integrated omnidirectional with (2) radiating elements to allow for the use of
diversity
Internal: 2.48 dBi peak
2.4 GHz to 2.4835 GHz based on country regulations
Based on the country of operation specified by the system administrator
54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, and
6 Mbps, with automatic fallback
Orthogonal frequency division multiplexing (OFDM)
Based on the country of operation specified by the system administrator
Nortel WLAN Access Point 2330/2330A/2330B Installation Guide
AP technical specifications 113
Table 9 on page 113.