High Voltage Protect - Teledyne T3MIL50 User Manual

2. Beep menu
appears
Note

High Voltage Protect

Background
Note
70
Use the arrow keys to choose a beep setting and press
Enter.
Use the arrow keys to set the selected setting and press
Enter to confirm.
Key Click Setting
Compare Setting
Binning Setting
Beep Settings: Key Click
Compare
Binning
Pressing ESC before pressing ENTER will exit from the
selected Beep setting.
This page is to enable or disable the function of HVP
(High Voltage Protect), which promptly interrupts output
to DUT with warning note present when high voltage is
carried by the DUT. If, on the other hand, HVP is tuned
Off, output test will keep going without interruption in
any case.
The HVP function is enabled by default and can be
deactivated manually by the user. When HVP is disabled,
the user should pay attention if any high voltage occurs
from the connected DUT, which may cause damage to the
T3MIL50/50X.
T3MIL Series User Manual
On, Off
Off. Pass, Fail
Off. Pass, Fail