Safety Compliance; Ec Declaration Of Conformity - Low Voltage - Teledyne T3LCR1002 Quick Start Manual

AS/NZS CISPR 11:2015 Radiated and Conducted Emissions, Group
1, Class A.
Australia / New Zealand Contacts:*
RS Components Pty Ltd.
Suite 326 The Parade West
Kent Town, South Australia 5067 761 Great South Road
* Visit teledynelecroy.com/support/contact for the latest contact information.

Safety Compliance

EC DECLARATION OF CONFORMITY – LOW VOLTAGE
The instrument meets intent of EC Directive 2014/35/EU for
Product Safety. Compliance was demonstrated to the following
specifications as listed in the Official Journal of the European
Communities:
EN 61010-1:2010 Safety requirements for electrical equipment for
measurement, control, and laboratory use –
Part 1: General requirements
EN 61010-2:030:2010 Safety requirements for electrical equipment
for measurement, control, and laboratory use –
Part 2-030: Particular requirements for testing and measuring
circuits
The design of the instrument has been verified to conform to the
following limits put forth by these standards:
•
Mains Supply Connector: Overvoltage Category II, instrument
intended to be supplied from the building wiring at utilization
points (socket outlets and similar).
•
Measuring Circuit Terminals: No rated measurement category.
Terminals not intended to be connected directly to the mains
supply.
RS Components Ltd.
Units 30 & 31 Warehouse World
Penrose, Auckland, New Zealand
13